Configuring Ports; Defining Port Configuration - Dell PowerConnect 3424 User Manual

Assigning ACL Membership Using the CLI Commands
The following table summarizes the equivalent CLI commands for assigning ACL membership as
displayed in the ACL Binding page.
Table 7-66. ACL Binding CLI Commands
CLI Command
service-acl {input acl-name}
The following is an example of the CLI commands:
console(config)# interface vlan 123
console(config-if)# service-acl input dell

Configuring Ports

The Ports page provides links for configuring port functionality including advanced features such
as storm control and port mirroring, and for performing virtual port tests. To open the Ports page
Select Switch→ Ports.

Defining Port Configuration

Use the Port Configuration page to define port parameters. If port configuration is modified while
the port is a LAG member, the configuration change is only effective after the port is removed from
the LAG. To open the Port Configuration page, click Switch→ Ports→ Port Configuration in the
tree view.
246
Configuring Switch Information
Description
Applies an access-list to the
interface input.