Dell PowerConnect 3424 User Manual page 268

The Dynamic MAC Address page contain the following fields:
Address Aging (10-630) — Specifies the amount of time the MAC Address remains in the
Dynamic MAC Address before it is timed out if no traffic from the source is detected. The default
value is 300 seconds.
Clear Table — Clears the Dynamic Address table, when checked.
Port — Specifies the interface for which the table is queried. There are two interface types from
which to select.
MAC Address — Specifies the MAC address for which the table is queried.
VLAN ID — The VLAN ID for which the table is queried.
Address Table Sort Key — Specifies the means by which the Dynamic Address Table is sorted. The
address table can be sorted by address, VLAN or interface.
Redefining the Aging Time
1
Open the Dynamic MAC Address.
2
Define the Aging Time field.
3
Click Apply Changes.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1
Open the Dynamic MAC Address.
2
Define the parameter by which to query the Dynamic Address Table.
Entries can be queried by Port, MAC Address, or VLAN ID.
3
Click Query.
The Dynamic MAC Address is queried.
Sorting the Dynamic Address Table
1
Open the Dynamic MAC Address.
2
From the Address Table Sort Key drop-down menu, select whether to sort addresses by
address, VLAN ID, or interface.
3
Click Query.
The Dynamic MAC Address is sorted.
268
Configuring Switch Information