Configuring Acl Binding - Dell PowerConnect 3424 User Manual

The following is an example of the CLI commands:
console (config)# mac access-list dell
console (config-mac-al)# deny 00-10-B5-F4-00-01

Configuring ACL Binding

When an ACL is bound to an interface, the ACL is applied to the selected interface. Use the ACL
Bindings page to assign ACL Lists to classification methods and interfaces. To open the ACL
Bindings page, select Switch→ Network Security→ ACL Binding.
Figure 7-11. ACL Bindings
The ACL Bindings page contains the following fields:
Select an ACL — The ACL type to which incoming packets are matched.
Bind ACL to VLAN — The VLAN to which the ACL is attached.
Assigning an ACL to an Interface
1
Open the ACL Bindings page.
2
Select the ACL type in the Select an ACL field.
3
Select the VLAN to which the ACL is attached in the Bind ACL to an VLAN field.
4
Click Apply Changes.
The ACL is attached to the interface.
244
Configuring Switch Information