Dell PowerConnect 3424 User Manual page 243

Assigning MAC based ACEs to ACLs Using the CLI Commands
The following table summarizes the equivalent CLI commands for assigning MAC based ACEs to
ACLs, as displayed in the MAC Based ACL page.
Table 7-65. MAC-Based ACE CLI Commands
CLI Command
mac access-list name
deny destination
show access-lists [ name ] Displays Access Control Lists configured on the device.
Description
Creates Layer 2 MAC ACLs, and enters to MAC-Access
list configuration mode.
Denies traffic if the conditions defined in the MAC based
ACL are matched.
Configuring Switch Information
243