Activating Image Files - Dell PowerConnect 3424 User Manual

Activating Image Files

The Active Images page allows network managers to select and reset the Image files. The Active
Image file for each unit in a stacking configuration can be individually selected. To open the Active
Images page, click System → File Management → Active Images in the tree view.
Figure 6-77. Active Images
The Active Images page contains the following fields:
Unit No. — The unit number for which the Image file is selected.
Active Image — The Image file which is currently active on the unit.
After Reset — The Image file which is active on the unit after the device is reset. The possible field
values are:
Image 1 — Activates Image file 1 after the device is reset.
Image 2 — Activates Image file 2 after the device is reset.
Selecting an Image File
1
Open the Active Images page.
Select an Image file for a specific unit in the After Reset field.
2
Click Apply Changes.
3
The Image file is selected. The Image file reloads only after the next reset. The currently
selected Image file continue to run until the next device reset.
218
Configuring System Information