Sending Logs to a Server:
1
Open the Remote Log Server Settings page.
2
Select a server from the Available Servers drop-down list.
3
Define the fields.
4
Select the log severity in the Severity to Include check boxes.
5
Click Apply Changes.
The log settings are saved, and the device is updated.
Defining a New Server:
1
Open the Remote Log Server Settings page.
2
Click Add.
The Add a Log Server page opens:
Figure 6-22. Add a Log Server
The Add a Log Server page contains the additional field:
New Log Server IP Address — Defines the IP address of the new Log Server.
3
Define the fields.
4
Click Apply Changes.
The server is defined and added to the Available Servers list.
Displaying the Remote Log Servers Table:
1
Open the Remote Log Server Settings page.
2
Click Show All.
The Log Servers Table page opens:
Configuring System Information
133