Dell PowerConnect 3424 User Manual page 282

Enabling STP on a Port
1
Open the Spanning Tree Port Settings page.
2
Select the port.
3
Select Enabled in the STP field.
4
Define the Fast Link, Path Cost, and the Priority fields.
5
Click Apply Changes.
STP is enabled on the port.
Modifying STP Port Properties
1
Open the Spanning Tree Port Settings page.
2
Select the port.
3
Modify the relevant fields.
4
Click Apply Changes.
The STP port parameters are modified, and the device is updated.
Displaying the STP Port Table
1
Open the Spanning Tree Port Settings page.
2
Click Show All.
The STP Port Table opens.
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters
as displayed in the STP Port Settings page.
Table 7-75. STP Port Settings CLI Commands
CLI Command
spanning-tree disable
spanning-tree cost cost
spanning-tree port-priority
priority
show spanning-tree [ethernet
interface | port-channel
port-channel-
number ][instance instance-
id ]
282
Configuring Switch Information
Description
Disables spanning tree on a specific port.
Configures the spanning tree cost
contribution of a port.
Configures port priority.
Displays spanning tree configuration.