Dell PowerConnect 3424 User Manual page 381

The DSCP to Queue page contains the following fields:
DSCP In — The values of the DSCP field within the incoming packet.
Queue — The queue to which packets with the specific DSCP value is assigned. The values are 1-
4, where 1 is the lowest value and 4 is the highest.
Mapping a DSCP Value and Assigning a Priority Queue
1
Open the DSCP to Queue page.
2
Select a value in the DSCP In column.
3
Define the Queue field.
4
Click Apply Changes.
The DSCP is overwritten, and the value is assigned an egress queue.
Assigning DSCP Values Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the DSCP
to Queue page.
Table 9-112. DSCP Value to Queue CLI Commands
CLI Command
qos map dscp-queue dscp-list
to queue-id
The following is an example of the CLI commands:
console(config)# qos map dscp-queue 33 40 41 to 1
Description
Modifies the DSCP to queue mapping.
Configuring Quality of Service
381