Dell PowerConnect 3424 User Manual page 176

Deleting Users:
1
Open the Local User Database page.
2
Click Show All.
The Local User Table opens.
3
Select a User Name.
4
Select the Remove check box.
5
Click Apply Changes.
The selected user is deleted, and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Local User Database page.
Table 6-43. Local User Database CLI Commands
CLI Command
username name [password
password] [level level]
[encrypted]
set username name active
The following is an example of the CLI commands:
console(config)# username bob password lee level 15
console# set username bob active
176
Configuring System Information
Description
Establishes a username-based authentication system.
Reactivates a suspended user's access rights.