Dell PowerConnect 3424 User Manual page 125

Enabling Logs:
1
Open the Global Log Parameters page.
2
Select Enable in the Logging drop-down list.
3
Select the log type and log severity in the Global Log Parameters check boxes.
4
Click Apply Changes.
The log settings are saved, and the device is updated.
Enabling Logs Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Global Log Parameters page.
Table 6-25. Global Log Parameters CLI Commands
CLI Command
logging on
logging {ip-address |
hostname} [port port]
[severity level] [facility
facility] [description text]
logging console level
logging buffered level
logging file level
clear logging
clear logging file
The following is an example of the CLI commands:
console(config)# logging on
console(config)# logging console errors
console(config)# logging buffered debugging
console(config)# logging file alerts
console(config)# end
console# clear logging file
Clear Logging File [y/n]y
Description
Enables error message logging.
Logs messages to a syslog server. For a list of the
Severity levels, see "Log Severity Levels" on
page 123.
Limits messages logged to the console based on
severity.
Limits syslog messages displayed from an internal
buffer (RAM) based on severity.
Limits syslog messages sent to the logging file
based on severity.
Clears logs.
messages from the logging file
Clears .
Configuring System Information
125