Dell PowerConnect 3424 User Manual page 249

are connected to each other, a crossover cable is used ensure that the correct pairs are connected.
Auto MDIX does not operate on FE ports if auto negotiation is disabled. The possible field
values are:
Auto — Use to automatically detect the cable type.
MDIX — Use for hubs and switches.
MDI — Use for end stations.
Current MDI/MDIX — Indicates the current device MDIX settings. The possible field values are:
MDI — The current MDI setting is MDI.
MDIX — The current MDI setting is MDIX.
LAG — Specifies if the port is part of a LAG.
NOTE:
If port configuration is modified while the port is a LAG member, the configuration change is
only effective after the port is removed from the LAG.
Defining Port Parameters
1
Open the Port Configuration page.
2
Select a port in the Port Field.
3
Define the available fields in the dialog.
4
Click Apply Changes.
The port parameters are saved to the device.
Displaying the Port Table
1
Open the Port Configuration page.
2
Click Show All.
The Port Configuration Table opens.
Figure 7-13. Port Configuration Table
Configuring Switch Information
249