Figure 6-12. Sntp Servers - Dell PowerConnect 3424 User Manual

Figure 6-12. SNTP Servers

The SNTP Servers page contains the following fields:
SNTP Server — Select a user-defined SNTP server IP address. Up to eight SNTP servers can
be defined.
Poll Interval — Enables polling the selected SNTP Server for system time information,
when enabled.
Encryption Key ID — Indicates the Key Identification used to communicate between the SNTP
server and device. The range is 1 - 4294967295.
Preference — The SNTP server providing SNTP system time information. The possible field
values are:
Primary — The primary server provides SNTP information.
Secondary — The backup server provides SNTP information.
Status — The operating SNTP server status. The possible field values are:
Up — The SNTP server is currently operating normally.
Down — Indicates that a SNTP server is currently not available. For example, the SNTP
server is currently not connected or is currently down.
In progress — The SNTP server is currently sending or receiving SNTP information.
Unknown — The progress of the SNTP information currently being sent is unknown. For
example, the device is currently looking for an interface.
Last Response — The last time a response was received from the SNTP server.
Configuring System Information
117