Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
File Download from Server page.
Table 6-55. File Download CLI Commands
CLI Command
copy source-url destination-url Copies any file from a source to a destination.
The following is an example of the CLI commands:
console# copy tftp://10.6.6.64/pp.txt startup-config
....!
Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]
01-Jan-2000 06:41:55 %COPY-W-TRAP: The copy operation was
completed successfully
NOTE:
Each exclamation mark (!) indicates that ten packets were successfully transferred.
Uploading Files
The File Upload to Server page contains fields for uploading the software to the TFTP server from
the device. The Image file can also be uploaded from the File Upload to Server page. To open the
File Upload to Server page, click System → File Management → File Upload in the tree view.
Description
Configuring System Information
215