Dell PowerConnect 3424 User Manual page 313

Enabling GVRP on the Device
1
Open the GVRP Global Parameters page.
2
Select Enable in the GVRP Global Status field.
3
Click Apply Changes.
GVRP is enabled on the device.
Enabling VLAN Registration Through GVRP
1
Open the GVRP Global Parameters page.
2
Select Enable in the GVRP Global Status.
3
Select Enable in the GVRP State field for the desired interface.
4
Select Enable in the GVRP Registration field.
5
Click Apply Changes.
GVRP VLAN Registration is enabled on the port, and the device is updated.
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed
in the GVRP Global Parameters page.
Table 7-85. GVRP Global Parameters CLI Commands
CLI Command
gvrp enable (global)
gvrp enable (interface)
gvrp vlan-creation-forbid
gvrp registration-forbid
show gvrp configuration [ethernet
interface| port-channel port-channel-
number]
show gvrp error-statistics [ethernet
interface| port-channel port-channel-
number]
show gvrp statistics [ethernet interface|
port-channel port-channel-number]
clear gvrp statistics [ethernet interface|
port-channel port-channel-number]
Description
Enables GVRP globally.
Enables GVRP on an interface.
Enables or disables dynamic VLAN creation.
De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on the
port.
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
Displays GVRP error statistics.
Displays GVRP statistics.
Clears all the GVRP statistics information.
Configuring Switch Information
313