Dell PowerConnect 3424 User Manual page 323

Figure 7-39. LAG Membership
The LAG Membership page contains the following fields:
LACP — Aggregates the port to a LAG, using LACP.
LAG — Adds a port to a LAG, and indicates the specific LAG to which the port belongs.
Adding Ports to a LAG or LACP
1
Open the LAG Membership page.
2
In the LAG row (the second row), toggle the button to a specific number to aggregate or
remove the port to that LAG number.
3
In the LACP row (the first row), toggle the button under the port number to assign either the
LACP or the static LAG.
4
Click Apply Changes.
The port is added to the LAG or LACP, and the device is updated.
Adding Ports to LAGs Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to LAGs as
displayed in the LAG Membership page.
Configuring Switch Information
323