Dell PowerConnect 3424 User Manual page 105

Table 6-16. System Health CLI Commands (continued)
CLI Command
power inline
usage-threshold
power inline
traps enable
show power inline
[ ethernet
interface ]
The following is an example of the PoE CLI commands.
Console# show power inline
Power: On
Nominal Power: 150 Watts
Consumed Power: 120 Watts (80%)
Usage Threshold: 95%
Traps: Enabled
Port Powered Device
---- --------------
1/e1 IP Phone Model A Auto
2/e1 Wireless AP
Model
3/e1
Console# show power inline ethernet 1/e1
Port Powered Device
---- --------------
1/1e IP Phone Model A Auto
Overload Counter: 1
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Description
Configures the threshold for triggering alarms
Enables PoE device traps
Displays PoE configuration information
State Priority Status Classification [W]
----- -------- ------ ------------------
High
Auto Low
Auto Low
State Priority Status Classification [W]
----- -------- ------ ------------------
High
On 0.44 – 12.95
On 0.44 – 3.84
Off N/A
On 0.44 – 12.95
Configuring System Information
105