NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Show Logging
The example is shown as CLI commands and as a Web interface procedure.
CLI: Show Logging
(Netgear Switch Routing) #show logging
Logging Client Local Port
CLI Command Logging
Console Logging
Console Logging Severity Filter :
Buffered Logging
Syslog Logging
Log Messages Received
Log Messages Dropped
Log Messages Relayed
Log Messages Ignored
Web Interface: Show Logging
To use the Web interface to configure the managed switch, proceed as follows:
1.
Configure the Syslog.
a.
From the main menu, select Monitoring > Logs > Sys Log Configuration.
Figure 19-2
19-2
:
514
:
disabled
:
disabled
alert
:
enabled
:
enabled
:
66
:
0
:
0
:
0
v1.0, November 2008
Syslog