NETGEAR FSM726E-100NAS Administration Manual page 166

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
d. Under Extended ACL Rule Configuration (100-199), enter the following information and make the
following selections:
• In the Rule ID field, enter 1.
• Next to Action mode, select the Permit radio button.
• Select False from the Match Every pull-down menu.
• Select IP from the Protocol Type pull-down menu.
e. Click Apply to save the settings.
11. Apply ACL 101 to port 44.
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
Figure 12-20
b. Under Binding Configuration, make the following selection and enter the following information:
• Select 101 from the ACL ID pull-down menu.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 44. A flag appears in the box.
e. Click Apply to save the settings.
12. Apply ACL 102 to port 44.
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
12-20
v1.0, November 2008
Access Control Lists (ACLs)