NETGEAR FSM726E-100NAS Administration Manual page 135

3. Enable OSPF on the switch.
a. From the main menu, select Routing > OSPF > Basic>OSPF Configuration. A screen similar to the
following displays.
Figure 9-47
b. Next to the OSPF Admin Mode, select Enable Radio button.
c. Enter 192.150.9.9 in the Router ID filed.
d. Click Apply to save the setting.
4. Enable OSPF on the VLAN 10.
a. From the main menu, select Routing > OSPF > Advanced>Interface Configuration. A screen
similar to the following displays.
Figure 9-48
b. Under the Interface Configuration, click the VLANS to show all the VLAN interfaces.
c. Under IP Interface Configuration, scroll down to interface 0/2/1 and select the checkbox for that
interface. 0/2/1 now appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.2.
• Select the Enable from the OSPF Admin Mode pull-down menu.
OSPF
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
9-41