Table of Contents
Advertisement
2.
Under Port Security Configuration, select 1/0/1 from the Port List pull-down menu.
3.
Select the Convert Dynamic Address to Static checkbox.
4.
Click Apply to save the settings.
Create a Static Address
The example is shown as CLI commands and as a Web interface procedure.
CLI: Creating a Static Address
(Netgear Switch) (Interface 1/0/1)#port-security mac-address 00:13:00:01:02:03
Web Interface: Creating a Static Address
To use the Web interface to create a static address, proceed as follows:
1.
From the main menu, select Security > Traffic Control >Port Security->Static MAC address. A screen
similar to the following displays.
Figure 16-4
2.
Under Port List, select 1/0/1 from the Interface pull-down menu.
3.
Enter the following information in the Static MAC Address.
•
In the Static MAC Address field, enter 00:13:00:01:02:03.
•
Select 3 from the Vlan ID pull-down menu.
4.
Click Add.
Security Management
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
16-5
Advertisement
Table of Contents
