Table of Contents
Advertisement
b. Under Interface Configuration, scroll down to interface 2/0/19 and select the checkbox for that
interface. 2/0/19 now appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.1.
•
Select the Enable from the OSPF Admin Mode pull-down menu.
c.
Click Apply button to save the settings.
7.
Configure area 0.0.0.1 as a nssa area.
a.
From the main menu, select Routing > OSPF > Advanced> NSSA Area Configuration. A screen
similar to the following displays.
Figure 9-36
b. Enter the following information in the NSSA Area Configuration.
•
In the Area ID field, enter 0.0.0.1.
•
Select the Disable from the Import Summary LSA's pull-down menu.
c.
Click Add to save the settings.
CLI: Configuring Area 1 as a nssa Area on A2
Enable routing on the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#router ospf
Set the router id to 2.2.2.2.
(Netgear Switch) (Config-router)#router-id 2.2.2.2
Configure the area 0.0.0.1 as a nssa area.
(Netgear Switch) (Config-router)# area 0.0.0.1 nssa
OSPF
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
9-31
Advertisement
Table of Contents
