NETGEAR FSM726E-100NAS Administration Manual page 109

7000 series managed switch administration guide for software version 7.3

Table of Contents

From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen

similar to the following displays.

b. Under Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that

interface. 1/0/3 now appears in the Interface field at the top.

In the OSPF Area ID field, enter 0.0.0.3.

Select the Enable from the OSPF Admin Mode pull-down menu.

In the Priority field, enter 255.

In the Metric Cost field, enter 64.

Click Apply button to save the settings.

Enable OSPF on the port 1/0/4.

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3

v1.0, November 2008