NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
2.
Assign IP address 192.168.10.1 to the port 1/0/15.
a.
From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-25
b. Under IP Interface Configuration, scroll down to interface 1/0/15 and select the checkbox for that
interface. 1/0/15 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.168.20.2.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable from the pull-down menu.
d. Click Apply to save the settings.
3.
Specify the Router ID and Enable OSPF for the switch
a.
From the main menu, select Routing > OSPF > Basic> OSPF Configuration. A screen similar to the
following displays.
Figure 9-26
b. Under the OSPF Configuration, enter the following information:
In the Router ID, enter 2.2.2.2.
c.
Click Apply to save the settings.
9-24
v1.0, November 2008
OSPF