NETGEAR FSM726E-100NAS Administration Manual page 339

3. Configure MST Port.
a. From the main menu, select Switching > STP > MST Port Status. A screen similar to the following
displays.
Figure 26-7
4. Under MST Port Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. 1/0/3 now appears in the Interface field at the top.
5. Enter the following information in the MST Port Status.
• In the Port Priority field, enter 128.
• In the Port Path Cost field, enter 0.
6. Click Apply.
Spanning Tree Protocol
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
26-7