NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
13. Apply ACL 103 to port 24 and port 48:
a.
From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
Figure 12-43
b. Under Binding Configuration, make the following selection and enter the following information:
•
Select 103 from the ACL ID pull-down menu.
•
In the Sequence Number field, enter 2.
c.
Click Unit 1. The ports display. Configure the following ports:
•
Click on the gray box under port 24. A flag appears in the box.
•
Click on the gray box under port 48. A flag appears in the box.
d. Click Apply to save the settings.
Set up a MAC ACL with Two Rules
The example is shown as CLI commands and as a Web interface procedure.
12-38
v1.0, November 2008
Access Control Lists (ACLs)