NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
d. Click Apply to save the settings.
Convert the Dynamic Address Learned from 1/0/1 to the Static Address
The example is shown as CLI commands and as a Web interface procedure.
CLI: Converting the Dynamic Address Learned from 1/0/1 to the Static
Address
(Netgear Switch)(Interface 1/0/1)#port-security mac-address move
Convert the dynamic address learned from 1/0/1 to the static
(Netgear Switch)(Interface 1/0/1)#exit
(Netgear Switch)(Config)#exit
(Netgear Switch)#show port-security static 1/0/1
Number of static MAC addresses configured: 3
Statically configured MAC Address VLAN ID
---------------------------------------------
00:0E:45:30:15:F3
00:13:46:EC:2F:62
00:14:6C:E8:81:23
Web Interface: Converting the Dynamic Address Learned from 1/0/1 to the
Static Address
To use the Web interface to convert the dynamic address to the static address, proceed as follows:
1.
From the main menu, select Security > Traffic Control >Port Security->Dynamic MAC Address. A
screen similar to the following displays.
Figure 16-3
16-4
1
1
1
v1.0, November 2008
address
Security Management