NETGEAR FSM726E-100NAS Administration Manual page 319

4. From the main menu, select System > Services > DHCP Server > DHCP Pool Configuration. A screen
similar to the following displays.
Figure 23-4
5. Under DHCP Pool Configuration, enter the following information:
• Select Create from the Pool Name pull-down menu.
• In the Pool Name field, enter pool_manual.
• Select Manual from the Type of Binding pull-down menu.
• In the Client Name field, enter dhcpclient.
• In the Hardware Address field, enter 00:01:02:03:04:05.
• Select ethernet from the Hardware Type pull-down menu.
• In the Host Number field, enter 192.168.200.1.
• In the Network Mask field, enter 255.255.255.0. As an alternate, you can enter 24 in the Network
Prefix Length field.
• In the Days field, enter 1.
6. Click Add. The pool_manual name is now added to the Pool Name pull-down menu.
DHCP Server
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
23-5