NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Web Interface: Authenticating dot1x Users by a RADIUS Server
1.
Enable routing for the switch.
a.
From the main menu, select Routing > Basic >IP Configuration. A screen similar to the following
displays.
Figure 16-13
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply to save the settings.
2.
Assign IP address 192.168.1.1/24 to the interface 1/0/1
a.
From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Figure 16-14
b. Under IP Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for that
interface. 1/0/1 now appears in the Interface field at the top.
c.
Under the IP Interface Configuration, enter the following information.
•
Enter 192.168.1.1 in the IP Address field.
•
Enter 255.255.255.0 in the Subnet Mask.
•
Select Enable from Routing Mode pull-down menu.
d. Click Apply to save the settings.
16-16
v1.0, November 2008
Security Management