NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
f.
From the main menu, select Switching > VLAN> Advanced > Port PVID Configuraton. A screen
similar to the following displays.
Figure 7-7
g.
Under PVID Configuration, scroll down to interface 1/0/3 and select the checkbox for
1/0/3.
h. Enter the following information in the PVID Configuration.
In the PVID(1 to 4093) field, enter 20.
i.
Click Apply to save the settings.
Set Up VLAN Routing for the VLANs and the Switch
The example is shown as CLI commands and as a Web interface procedure.
CLI: Setting Up VLAN Routing for the VLANs and the Switch
The following code sequence shows how to enable routing for the VLANs:
(Netgear Switch) #vlan data
(Netgear Switch) (Vlan)#vlan routing 10
(Netgear Switch) (Vlan)#vlan routing 20
(Netgear Switch) (Vlan)#exit
This returns the logical interface IDs that will be used instead of slot/port in subsequent routing commands.
Assume that VLAN 10 is assigned ID 3/1 and VLAN 20 is assigned ID 3/2.
7-6
v1.0, November 2008
VLAN Routing