NETGEAR FSM726E-100NAS Administration Manual page 105

a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-9
b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. 1/0/2 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration:
• In the IP Address field, enter 192.150.2.2.
• In the Network Mask field, enter 255.255.255.0.
• Select Enable from the pull-down menu.
d. Click Apply to save the settings.
3. Assign IP address 192.130.3.1 to the port 1/0/3:
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-10
OSPF
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
9-11