Configure Area 1 As A Nssa Area; Cli: Configuring Area 1 As A Nssa Area - NETGEAR FSM726E-100NAS Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
c. Click Add to save the settings.

Configure Area 1 as a nssa Area

Port 2/0/11
Area 0
Figure 9-29
The example is shown as CLI commands and as a Web interface procedure.

CLI: Configuring Area 1 as a nssa Area

Enable routing on the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#router ospf
(Netgear Switch) (Config)#ip routing
Configure area 0.0.0.1 as a nssa area.
(Netgear Switch) (Config)#router ospf
(Netgear Switch) (Config-router)#router-id 1.1.1.1
(Netgear Switch) (Config-router)#area 0.0.0.1 nssa
Stop importing summary LSA to the area 0.0.0.1.
(Netgear Switch) (Config-router)#area 0.0.0.1 nssa no-summary
9-26
Layer 3
Switch
Port 2/0/191
v1.0, November 2008
Port 1/0/151
Area 1
Layer 3
Switch
OSPF