Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Web Interface: Renumbering Stack Members
To use the Web interface to renumber the stack number, proceed as follows:
1.
Renumbering the stacking member's ID from 3 to 2.
a.
From the main menu, select System > Management > Basic > Stack Configuration. A screen
similar to the following displays.
Figure 20-3
b. Under Stack Configuration, scroll down to Unit ID 3 and select the checkbox for 3. 3 now appears
in the Interface field at the top.
c.
Select the 2 from the Unit ID pull-down menu.
d. Click Apply.
e.
Now the unit ID of the stacking member is 2.
Figure 20-4
20-12
v1.0, November 2008
Managing Switch Stacks
Advertisement
Table of Contents
