Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
CLI: ip proxy-arp
(Netgear Switch) (Interface 0/24)#ip proxy-arp ?
<cr>
(Netgear Switch) (Interface 0/24)#ip proxy-arp
Web Interface: Configuring Proxy ARP on a Port
To use the Web interface to configure proxy ARP on a port, proceed as follows:
1.
Configure proxy ARP.
a.
From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 10-1
b. Under IP Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. 1/0/3 now appears in the Interface field at the top.
c.
Select the Enable from the Proxy Arp pull-down menu.
d. Click Apply to save the settings.
10-2
Press Enter to execute the command.
v1.0, November 2008
Proxy Address Resolution Protocol (ARP)
Advertisement
Table of Contents
