Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select Switching > Multicast > IGMP Snooping Configuration. A screen
similar to the following displays.
Figure 15-1
b. Enter the following information in the IGMP Snooping Configuration.
Next to the Admin mode field, select the Enable radio button.
c.
Click Apply.
Show igmpsnooping
The example is shown as CLI commands and as a Web interface procedure.
15-2
v1.0, November 2008
IGMP Snooping and Querier
Advertisement
Table of Contents
