Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
CLI: Authenticating dot1x Users by a RADIUS Server
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#routing
(Netgear Switch) (Interface 1/0/1)#ip address 192.168.1.1 255.255.255.0
(Netgear Switch) (Config)#dot1x system-auth-control
Enable dot1x on the switch.
(Netgear Switch) (Config)#authentication login dot1xList radius
Create a username list dot1xList
(Netgear Switch) (Config)#dot1x default-login dot1xList
Set the dot1xList as the dot1x default login user list.
(Netgear Switch) (Config)#radius server host auth 10.100.5.17
To configure a RADIUS authentication server.
Netgear Switch) (Config)#radius server key auth 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
To configure the shared secret between the RADIUS client and the server.
(Netgear Switch) (Config)#radius server msgauth 10.100.5.17
(Netgear Switch) (Config)# radius server primary 10.100.5.17
To set the RADIUS server as a primary server.
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
To configure a accounting server.
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
To configure the shared secret between the accounting server and the client.
Security Management
16-15
v1.0, November 2008
Advertisement
Table of Contents
