the querier for VLAN 1. See the CLI Manual for more details about other IGMP querier command options.
(Netgear switch) #vlan database
(Netgear switch) (vlan)#ip igmp 1
(Netgear switch) (vlan)#ip igmpsnooping querier 1
(Netgear switch) (vlan)#exit
(Netgear switch) #config
(Netgear switch) (config)#ip igmpsnooping
(Netgear switch) (config)#exit
Web Interface: Enabling IGMP Querier
1.
From the main menu, select Switching > Multicast >IGMP VLAN Configuration. A screen similar to
the following displays.
Figure 15-7
2.
Enter the following information in the IGMP VLAN Configuration.
•
In the VLAN ID field, enter 1.
•
Select Enable from the Query Mode pull-down menu.
•
In the Querier Interval field, enter 60.
3.
Click Add.
IGMP Snooping and Querier
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
15-9