Table of Contents
Advertisement
Log Port Configuration
The example is shown as CLI commands and as a Web interface procedure.
CLI: Logging Port Configuration
(Netgear Switch Routing)
(Netgear Switch Routing) (Config)#logging ?
buffered
Buffered (In-Memory) Logging Configuration.
cli-command
console
host
syslog
(Netgear Switch Routing) (Config)#logging host ?
<hostaddress>
reconfigure
remove
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?
<cr>
Press Enter to execute the command.
<port>
Enter Port Id
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
<cr>
Press Enter to execute the command.
<severitylevel>
Enter Logging Severity Level (emergency|0, alert|1, critical|2,
error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
<cr>
Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index
IP Address
-----
-----------------
1
192.168.21.253
Web Interface: Logging Port Configuration
Syslog
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
#config
CLI Command Logging Configuration.
Console Logging Configuration.
Enter IP Address for Logging Host
Syslog Configuration.
Enter Logging Host IP Address
Logging Host Reconfiguration
Logging Host Removal
Severity
----------
alert
v1.0, November 2008
Port
Status
----
-------------
4
Active
19-9
Advertisement
Table of Contents
