NETGEAR FSM726E-100NAS Administration Manual page 77

g. Select 20 from the VLAN ID pull-down menu.
h. Click the Unit 1. The Ports display.
i. Click the gray box under port 3 until T displays. The T specifies that the egress packet is tagged for
the port.
j. Click Apply
3. Assign PVID to the VLAN10 and VLAN20.
a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuraton. A screen
similar to the following displays.
Figure 7-6
b. Under PVID Configuration, scroll down to interface 1/0/1 and select the checkbox for
1/0/1. Then scroll down to the interface 1/0/2 and select the checkbox for 1/0/2.
c. Enter the following information in the PVID Configuration.
d. In the PVID (1 to 4093) field, enter 10.
e. Click Apply to save the settings.
VLAN Routing
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
7-5