Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Web Interface: Configuring SNTP
To use the Web interface to configure SNTP, proceed as follows:
1.
Configure SNTP server
a.
From the main menu, select System > Management>Time>SNTP Server Configuration. A screen
similar to the following displays.
Figure 17-1
b. Enter the following information in the SNTP Server Configuration.
•
Select the IPV4 from the Server Type pull-down menu.
•
In the Address field, enter 208.14.208.19
•
In the Port field, enter 123
•
In the Priority field, enter 1
•
In the Version field, enter 4
c.
Click Add.
2.
Configure SNTP global configuration
17-4
Simple Network Time Protocol (SNTP)
v1.0, November 2008
Advertisement
Table of Contents
