Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Web Interface: Enabling Both LAGs
To use the Web interface to configure the switch, proceed as follows:
a.
From the main menu, select Switching > LAG >LAG Configuration. A screen similar to the
following displays.
Figure 5-6
b. Select the checkbox on the top and the checkboxes for lag_10 and lag_20 are selected.
c.
Select the Enable from the Admin Mode pull-down menu.
d. Click Apply to save the settings.
5-6
v1.0, November 2008
Link Aggregation
Advertisement
Table of Contents
