Diffserv For Voip Configuration - NETGEAR FSM726E-100NAS Administration Manual

7000 series managed switch administration guide for software version 7.3
Table of Contents

Advertisement

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select QoS > CoS >Advanced >Interface Queue Configuration. A screen
similar to the following displays.
Figure 14-27
b. Under Interface Queue Configuration, scroll down to interface 1/0/5 and select the checkbox for
1/0/5. 1/0/5 now appears in the Interface field at the top.
c.
Select the 4 from the Queue ID pull-down menu
d. In the Minimum Bandwidth field, enter 25.
e.
Click Apply.

DiffServ for VoIP Configuration

One of the most valuable uses of DiffServ is to support Voice over IP (VoIP). VoIP traffic is inherently time-
sensitive: for a network to provide acceptable service, a guaranteed transmission rate is vital. This example
shows one way to provide the necessary quality of service: how to set up a class for UDP traffic, have that
traffic marked on the inbound side, and then expedite the traffic on the outbound side. The configuration
14-20
v1.0, November 2008
Differentiated Services

Advertisement

Table of Contents
loading

Table of Contents