NETGEAR FSM726E-100NAS Administration Manual page 330

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
b. Enter the following information in the VLAN Membership.
Select 200 from the VLAN ID pull-down menu.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 6 , 7, 16 and 17 until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply.
3. Specify the pvid on port 1/0/6, 1/0/7, 1/0/16 and 1/0/17.
a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuraton. A screen
similar to the following displays.
Figure 25-4
b. Under PVID Configuration, scroll down to interface 1/0/6,1/0/7,1/0/16 and 1/0/17 and select the
checkbox for that interface.
c. Under PVID Configuration, enter 200 in the PVID(1 to 4093) field.
d. Under PVID Configuration, select Admit All from the Acceptable Frame Type pull-down menu.
e. Click Apply to save the settings.
4. Create a private group, group1.
a. From the main menu, select Security > Traffic Control> Private Group VLAN > Private Group
25-4
v1.0, November 2008
Private VLAN Groups