NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a.
From the main menu, select Routing > IP > IP Configuration. A screen similar to the following
displays.
Figure 9-2
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply to save the settings.
2.
Assign IP address 192.150.2.1 to the port 1/0/2.
a.
From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-3
b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. 1/0/2 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.150.2.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable from the pull-down menu.
d. Click Apply to save the settings.
9-4
v1.0, November 2008
OSPF