In this chapter, the following examples are provided:
•
"Show SNTP (CLI Only)"
•
"Configure SNTP" on page 17-2
•
"Set the Time Zone (CLI Only)" on page 17-5
•
"Set Named SNTP Server" on page 17-5
The Simple Network Time Protocol (SNTP) feature:
•
Used for synchronizing network resources
•
Adaptation of NTP
•
Provides synchronized network timestamp
•
Can be used in broadcast or unicast mode
•
SNTP client implemented over UDP which listens on port 123
Show SNTP (CLI Only)
The following are examples of the commands used in the SNTP feature.
show sntp
(Netgear Switch Routing) #show sntp ?
<cr>
Press Enter to execute the command.
client
Display SNTP Client Information.
server
Display SNTP Server Information.
Simple Network Time Protocol (SNTP)
v1.0, November 2008
Chapter 17
17-1