NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
To use the Web interface to configure the managed switch, proceed as follows:
1.
From the main menu, select Monitoring > Logs >Sys Log Configuration. A screen similar to the
following displays.
Figure 19-9
2.
Enter the following information in the Host Configuration.
•
In the Host Address field, enter your host address 192.168.21.253.
•
In the Port field, enter 4.
•
Select Alert from the Severity Filter field.
3.
Click Add.
19-10
v1.0, November 2008
Syslog