NETGEAR FSM726E-100NAS Administration Manual page 122

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a. From the main menu, select Routing > IP > IP Configuration. A screen similar to the following
displays.
Figure 9-30
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Assign IP address 192.168.10.1 to the port 2/0/11:
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-31
b. Under IP Interface Configuration, scroll down to interface 2/0/11 and select the checkbox for that
interface. 2/0/11 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration:
• In the IP Address field, enter 192.168.10.1.
• In the Network Mask field, enter 255.255.255.0.
• Select Enable from the pull-down menu.
d. Click Apply to save the settings.
3. Assign IP address 192.168.20.1 to the port 2/0/19:
9-28
v1.0, November 2008
OSPF