NETGEAR FSM726E-100NAS Administration Manual page 107

7000 series managed switch administration guide for software version 7.3

Table of Contents

From the main menu, select Routing > OSPF > Advanced> OSPF Configuration. A screen similar

to the following displays.

b. Under the OSPF Configuration, enter the following information:

In the Router ID, enter 192.130.1.1.

Select the Enable from the OSPF Admin Mode pull-down menu.

Select the Disable from the RFC 1583 Compatibility pull-down menu.

Click Apply to save the settings.

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3

v1.0, November 2008