Create A Protocol-Based Vlan; Cli: Creating A Protocol-Based Vlan - NETGEAR FSM726E-100NAS Administration Manual

b. Enter the following information in the MAC Based VLAN Configuration.
• Enter 00:00:0A:00:00:02 in the MAC Address field.
• Enter 3 in the PVID(1 to 4093) field.
c. Click Add.

Create a Protocol-based VLAN

Create two protocol vlan groups, one is for IPX and the other is for IP/ARP. The untagged IPX packets is
assigned to VLAN 4, and the untagged IP/ARP packets is assigned to VLAN 5.

CLI: Creating a Protocol-based VLAN

Create a vlan protocol group vlan_ipx based on IPX protocol.
(Netgear Switch)#config
(Netgear Switch)(Config)#vlan protocol group vlan_ipx
(Netgear Switch)(Config)#vlan protocol group add protocol 1 ipx
Create a vlan protocol group vlan_ipx based on IP/ARP protocol.
(Netgear Switch)(Config)#vlan protocol group vlan_ip
(Netgear Switch)(Config)#vlan protocol group add protocol 2 ip
(Netgear Switch)(Config)#vlan protocol group add protocol 2 arp
(Netgear Switch)(Config)#exit
Assign vlan protocol group 1 to VLAN 4.
(Netgear Switch)#vlan database
(Netgear Switch)(Vlan)#vlan 4
(Netgear Switch)(Vlan)#vlan 5
(Netgear Switch)(Vlan)#protocol group 1 4
Assign vlan protocol group 2 to VLAN 5.
(Netgear Switch)(Vlan)#protocol group 2 5
Virtual LANs
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
4-13