Table of Contents
Advertisement
CLI: Showing igmpsnooping
(Netgear Switch)
<cr>
Press Enter to execute the command.
<slot/port>
Enter interface in slot/port format.
mrouter
Display IGMP Snooping Multicast Router information.
<1-4093>
Display IGMP Snooping valid VLAN ID information.
(Netgear Switch)
Admin Mode...............................
Multicast Control Frame Count............
Interfaces Enabled for IGMP Snooping.....
Vlans enabled for IGMP snooping..........
Web Interface: Showing igmpsnooping
To use the Web interface to configure the managed switch, proceed as follows:
1.
Configure the IGMP Snooping Configuration.
a.
From the main menu, select Switching > Multicast > IGMP Snooping Configuration. A screen
similar to the following displays.
Figure 15-2
IGMP Snooping and Querier
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
#show igmpsnooping?
#show igmpsnooping
v1.0, November 2008
Enable
0
1/0/10
20
15-3
Advertisement
Table of Contents
