1583Compatibility; Area Default-Cost; Area Nssa - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.5.4 1583compatibility

This command enables OSPF 1583 compatibility.
Note: 1583 compatibility mode is enabled by default. If all OSPF routers in the
Default
Format
Mode
14.5.4.1 no 1583compatibility
This command disables OSPF 1583 compatibility.
Format
Mode

14.5.5 area default-cost

This command configures the monetary default cost for the stub area. The operator must
specify the area id and an integer value between 1-16777215.
Format
Mode

14.5.6 area nssa

This command configures the specified areaid to function as an NSSA.
Format
Mode
14.5.6.1 no area nssa
This command disables nssa from the specified area id.
Format
Mode
Routing Commands
routing domain are capable of operating according to RFC 2328, OSPF
1583 compatibility mode should be disabled.
enabled
1583compatibility
Router OSPF Config
no 1583compatibility
Router OSPF Config
area <areaid> default-cost <1-16777215>
Router OSPF Config
area <areaid> nssa
Router OSPF Config
no area <areaid> nssa
Router OSPF Config
v4.1, October 2008
14-27